Omnia MFG is focused on closing the information gap between Mechanical Design Engineers and Manufacturers.
A Faraday Cage is created by encapsulating a space with conductive material that distributes the charges and radiation around the exterior.
Designing a bolted joint involves many structural considerations including preload requirements, torque requirements, thread engagements, etc. The bolted joint is expected to withstand the maximum applied forces to the joint over its lifetime of operations.
Blast and explosion mitigation has come a long way from thick concrete and metal housings. … The result was the discovery of a high tensile strength to weight ratio polymer given the name Energy/Explosion Resistant Coating or ERC.
A bolted joint is the joining of two pieces of material using a bolt (or other threaded fastener) and a nut or threaded/tapped hole. It is expected that the bolted joint will be able to withstand the maximum applied forces to the joint over its lifetime.
The Queensland University of Technology’s (QUT) Robotics and Autonomous Systems research group led by Professor Matthew Dunbabin and Dr. Feras Dayoub have developed a reef monitoring robotic system that they call the RangerBot Autonomous Underwater Vehicle (AUV).
Choosing the correct rivet length for structural and nonstructural purposes is important for making full use of the material properties of the chosen rivet. Rivets are permanent mechanical fasteners that plastically deform to maintain axial loading on a joint.
A MEMS (or Micro-Electro-Mechanical System) designation is used for many micro sensors including accelerometers and gyroscopes.
Modern accelerometers are available in all-in-one microscopic silicon chips that sense motion along an axis.
A LIDAR system will consist of a laser and laser detector, precision timing measurement system, GPS system, and an IMU.
Superconductive materials can achieve electrical resistance of 0 when cooled to a property temperature.
Flexible displays use electronic paper technologies originally co-developed by ASU and HP.
Nature’s ability to evolve through natural selection, genetic drift, and other mechanisms has become an inspiration to modern (and historic) design choices. This process of designing based on natures problem solving through evolution has been given the name – biomimicry.
Take a closer look at this fantastic high quality image of the Electromagnetic Radiation Spectrum created by unihedron.com.
In an engineering or manufacturing facility it is always useful to reference information or charts in a readily accessible format. Opening a phone or moving to a conference room simply to look at and discus a chart that should be displayed is a waste of time and can be fixed by simply displaying a large poster wall chart for all employees on a shop/factory floor or in an office.
Take a break from studying, working, or anything else and play Idle Downloader – a simple and fun idle game for Android and iOS where you run a server farm.
